Construction Waste Sizing
Release time：2021-02-02 13:58 Popularity：
As we all know, the characteristics of construction waste are complex components, such as cement block, brick, soil, light organic matter (plastic, fiber, wood, etc.), the soft and hardness of these components are different, the traditional treatment method is difficult to achieve the separation of various components, and the final product is unstable due to the complex components, and the use place is limited. How to effectively separate the mixed materials in construction waste is the key and difficult point of construction waste recycling. These problems are no longer big problems in Craun's construction waste separator.
Features
1. The construction waste sorter / sorter uses the separation device of brick and concrete blocks in materials, including a shell. A frame is fixed in the shell, and the frame is installed in the shell through a support at the bottom;
2. The machine frame is equipped with an eccentric vibration mechanism and a sieve plate, the eccentric vibration mechanism is located under the sieve plate and connected with the sieve plate through an articulated transmission rod, the eccentric vibration mechanism is connected with a motor, and the sieve plate is driven by the motor to make elliptical vibration;
3. The lower end of the sieve plate is connected with a brick outlet, the higher end of the sieve plate is connected with a concrete outlet, and the brick outlet and the lower end of the concrete outlet are extended from the shell;
4. The lower part of the construction waste sorting rack is fixed with an air blowing device;
5. The shell above the frame is provided with a feeding port and a trash discharging port;
6. Construction waste sorter / sorter can realize the stratification and relative movement of brick and concrete blocks in construction waste, so as to achieve the purpose of automatic sorting.
