Cutting Screw Conveyor

Release time：2021-03-16 15:32　Popularity：

Usage

U-shaped screw shall be used for horizontal or small angle (0-15 °) conveying. It can be divided into axial screw and non-axial screw. The shaft-less spiral has a strong anti-winding type and low requirements for materials. It has a strong advantage in conveying ribbon and easily wound materials.
The angle of G-type auger can reach 0-60 °. It is not suitable to clean up due to high requirements for material characteristics. In general, it is used for conveying at an inclined angle, and it is not suitable for conveying perishable, sticky and caking materials.

Features
1> Spiral blade is made of wear-resistant and thickened manganese steel;
2> Large bearing capacity, safe and reliable;
3> Compact structure, good sealing performance, high conveying efficiency, low noise of the whole machine, easy to install, dismantle and move, safe operation;
4> Different conveyor modes can be selected according to customer needs.

Technical Paramter

Model	Diameter (mm)	Length (m)	Capacity （t/h）	Motor Power （kw）	Speed （rpm）	Weight (kg)	Dimension (mm)
GLLSU300-08	300	8	20	5.5	80	1426	9150x450x600
GLLSU400-08	400	8	42	11	60	1668	9200x545x680
GLLSU400-15	400	15	42	18.5	60	3344	16950x545x680
GLLSU400-5	400	5	42	7.5	60	1200	6550x545x680
GLLSG250-5	250	5	48	7.5	60	1000	6350x273x273
GLLSG300-8	300	8	60	11	60	1500	9100x325x325
Remark: 1.The Capacity is based on 0°conveying angle & speed 60rpm; 2.The max.conveying angle for U-shaped conveyor is 15°，the capacity will decrease with the increase of the angle and length; 3.The max.conveying angle for U-shaped conveyor is 60°，the capacity will decrease with the increase of the angle and length; 4. Customized service can be provided.

Solid Control

Cutting Screw Conveyor

Usage